English
Latviešu
Русский
14.4V Li-Ion Battery Pack EYFB42B, EYFB41B
EYFB42B: High Capacity 4.2Ah
EYFB41B: Light Weight 2.0Ah
| Cordless Right Angle Impact Wrench | ||
|---|---|---|
| Type | EYFME1C | |
| Chuck Size | 9.5mm Square Drive Retainer ring and Pin-hole type | |
| Application | M6 bolt (Tensile bolt), M8 bolt (Normal-Tensile bolt), M10 bolt (Normal bolt) | |
| Maximum torque | approx.80 Nm (M12 , F mode, fastening 3sec.) | |
| Shut-off range | approx. 10 - 53 Nm | |
| Torque setting | 30 stage + F (without torque setting mode) | |
| Flush detection mode setting | L1: For lighter loads during fastener run down L2: For prevailing torque during run down and varying joint rate applications |
|
| No load speed (unit : rpm) | 0 ~ 2300 | |
| Impact per minute | 0 ~ 3500 | |
| Weight*1 (inc. battery) | approx. 1.5kg (EYFB41B), approx. 1.7kg (EYFB42B) | |
| Size | Length | 381mm (EYFB41B), 399mm (EYFB42B) |
| Height | approx. 96mm (Height of battery pack: approx. 101mm) | |
| Width | approx. 60mm (Width of battery pack: approx. 75mm) | |
| Function | Torque adjustment | x |
| Cross thread reduction | x (The tool rotates approx. 360 degree in reverse before fastening starts. Possible to choose ON/OFF) | |
| Rundown error detecting | x (Alert with Red light. Possible to set between 0 ~ 3 sec.. 0.1 sec. per stage) | |
| Maintenance interval alarm function | x (Possible to set between 0 - 990,000 times. 10,000 times per stage) | |
| Retightening prevention function | x (Possible to set between 0 ~ 0.9sec.. 0.1 sec. per stage) | |
| LED light | x (Possible to choose from the 2 LED light modes. by ON/OFF switch or trigger switch interlocked) | |
| Buzzer | x (Possible to choose from the 3 buzzer modes, No buzzer, buzzer with OK or buzzer with NOK) | |
| Tightening confirmation lamp | x (OK fastening: Green lamp. NOK fastening: Red lamp) | |
| Battery indication lamp | x (3 stage) | |
| Auto battery shut down | x | |
| Work capacity / Fastening speed | (EYFB41B) approx. 120 pcs/pack, approx. 2.2 sec/1pcs (EYFB42B) approx. 250 pcs/pack, approx. 2.2 sec/1pcs |
|
| Charging time | (Battery Pack EYFB41, Charger EY0L82B) Usable Charge: approx. 35min., Full Charge: approx. 40min (Battery Pack EYFB42, Charger EY0L82B) Usable Charge: approx. 50min., Full Charge: approx. 60min |
|
Accessories
Charger EY0L82B
Remote Control EYFA31B
Protector for Battery EYFA04H
EYFA04-H (gray) for EYFB42B
EYFA06-H (gray) for EYFB41B
Tool Hanger EYFA1B
The tool can be hanged on the balancer.
Protector for Tool EYFA12
- EYFA12-A (blue)
- EYFA12-Y (yellow)
- EYFA12-H (gray)
- EYFA12-G (green)
Delivery Info
Description
| Cordless Right Angle Impact Wrench | ||
|---|---|---|
| Type | EYFME1C | |
| Chuck Size | 9.5mm Square Drive Retainer ring and Pin-hole type | |
| Application | M6 bolt (Tensile bolt), M8 bolt (Normal-Tensile bolt), M10 bolt (Normal bolt) | |
| Maximum torque | approx.80 Nm (M12 , F mode, fastening 3sec.) | |
| Shut-off range | approx. 10 - 53 Nm | |
| Torque setting | 30 stage + F (without torque setting mode) | |
| Flush detection mode setting | L1: For lighter loads during fastener run down L2: For prevailing torque during run down and varying joint rate applications |
|
| No load speed (unit : rpm) | 0 ~ 2300 | |
| Impact per minute | 0 ~ 3500 | |
| Weight*1 (inc. battery) | approx. 1.5kg (EYFB41B), approx. 1.7kg (EYFB42B) | |
| Size | Length | 381mm (EYFB41B), 399mm (EYFB42B) |
| Height | approx. 96mm (Height of battery pack: approx. 101mm) | |
| Width | approx. 60mm (Width of battery pack: approx. 75mm) | |
| Function | Torque adjustment | x |
| Cross thread reduction | x (The tool rotates approx. 360 degree in reverse before fastening starts. Possible to choose ON/OFF) | |
| Rundown error detecting | x (Alert with Red light. Possible to set between 0 ~ 3 sec.. 0.1 sec. per stage) | |
| Maintenance interval alarm function | x (Possible to set between 0 - 990,000 times. 10,000 times per stage) | |
| Retightening prevention function | x (Possible to set between 0 ~ 0.9sec.. 0.1 sec. per stage) | |
| LED light | x (Possible to choose from the 2 LED light modes. by ON/OFF switch or trigger switch interlocked) | |
| Buzzer | x (Possible to choose from the 3 buzzer modes, No buzzer, buzzer with OK or buzzer with NOK) | |
| Tightening confirmation lamp | x (OK fastening: Green lamp. NOK fastening: Red lamp) | |
| Battery indication lamp | x (3 stage) | |
| Auto battery shut down | x | |
| Work capacity / Fastening speed | (EYFB41B) approx. 120 pcs/pack, approx. 2.2 sec/1pcs (EYFB42B) approx. 250 pcs/pack, approx. 2.2 sec/1pcs |
|
| Charging time | (Battery Pack EYFB41, Charger EY0L82B) Usable Charge: approx. 35min., Full Charge: approx. 40min (Battery Pack EYFB42, Charger EY0L82B) Usable Charge: approx. 50min., Full Charge: approx. 60min |
|
Accessories
14.4V Li-Ion Battery Pack EYFB42B, EYFB41B
EYFB42B: High Capacity 4.2Ah
EYFB41B: Light Weight 2.0Ah
Charger EY0L82B
Remote Control EYFA31B
Protector for Battery EYFA04H
EYFA04-H (gray) for EYFB42B
EYFA06-H (gray) for EYFB41B
Tool Hanger EYFA1B
The tool can be hanged on the balancer.
Protector for Tool EYFA12
- EYFA12-A (blue)
- EYFA12-Y (yellow)
- EYFA12-H (gray)
- EYFA12-G (green)
Delivery
Ask a question
