| Model / Type | EY7460LS2S |
|---|---|
| Voltage | 21.6V |
| Battery capacity accord. to IEC (technology) | 4.2Ah (Li-ion) |
| Charging time (usable / full) | 65 / 85min. |
| Speed at no load in rpm | low 100 ‑ 400 high 350 ‑ 1,500 |
| Max. torque (stalling / instant torque) | 42 / 63Nm |
| Clutch torque | 1.0 ‑ 6.9Nm |
| Clutch stages | 18 + drill position |
| Max. drilling diameter (in wood / in metal) | 38 / 13mm |
| Max. holesaw size (in wood / in metal) | 65mm / - |
| Size (W x L x B) | 75 x 232 x 255mm |
| Weight (incl. battery) | 2.45 kg |
| Standard accessories | 2 x battery EY9L62B charger EY0L82B incl. plastic box |
| Battery capacities | |||
|---|---|---|---|
| Voltage | 21.6 V | ||
| Model | EY7460LS2S | ||
| Battery | EY9L62B(LS) | ||
| Screwing | Wood screws in yellow pine* | Ø 4.1mm x 25mm | 1.700pcs |
| Wood screws in yellow pine** | Ø 8mm x 80mm | 570pcs | |
| Self-drilling screws in SPC* | Ø 3mm x 13mm t = 1.2mm | - | |
| Self-drilling screws in SPC* | Ø 4mm x 13mm t = 1.6mm | 1.200pcs | |
| Drilling | Holes in plaster board +Plywood/wooding core* | Plaster board 12.5mm + Plywood 12mm Ø 68mm × 24.5mm |
190pcs |
| Holes in plaster board +Plywood** | Plaster Board 12.5mm + Plywood 12mm Ø 125mm × 24.5mm |
45pcs | |
| Holes in SPC* | Ø 13mm t = 1.6mm | - | |
| Holes in SPC/hole saw* | Ø 21mm t = 1.6mm | 65pcs | |
| Holes in SPC/hole saw** | Ø 33mm t = 1.6mm | 65pcs | |
| Holes in yellow pine* | Ø 18mm x 120mm | 150pcs | |
| Holes in yellow pine** | Ø 30mm x 40mm | 210pcs | |
| * High mode ** Low mode | |||
Our highly efficient gear mechanism conducts the power of the motor directly without any power-loss. This enables high power Max 63Nm drilling for heaviest of applications - every job, every day.
* Percussion featured in EY7960 model only
The Tough Tool IP* concept includes features such as sensors which monitor batteries and protect against overheating and ‘over-discharge’. This technology ensures reliable, safe and powerful operation for the user.
1: Switch
Increased sealing helps protect against water and dust.
2: Electronics
The electronic circuits in control panel and battery pack are covered by a urethane layer for added dust and water protection.
3: Battery
The battery cells are designed to avoid intrusion of moisture.
*IP=INTELLIGENT POWER TOOL
Delivery Info
| Model / Type | EY7460LS2S |
|---|---|
| Voltage | 21.6V |
| Battery capacity accord. to IEC (technology) | 4.2Ah (Li-ion) |
| Charging time (usable / full) | 65 / 85min. |
| Speed at no load in rpm | low 100 ‑ 400 high 350 ‑ 1,500 |
| Max. torque (stalling / instant torque) | 42 / 63Nm |
| Clutch torque | 1.0 ‑ 6.9Nm |
| Clutch stages | 18 + drill position |
| Max. drilling diameter (in wood / in metal) | 38 / 13mm |
| Max. holesaw size (in wood / in metal) | 65mm / - |
| Size (W x L x B) | 75 x 232 x 255mm |
| Weight (incl. battery) | 2.45 kg |
| Standard accessories | 2 x battery EY9L62B charger EY0L82B incl. plastic box |
| Battery capacities | |||
|---|---|---|---|
| Voltage | 21.6 V | ||
| Model | EY7460LS2S | ||
| Battery | EY9L62B(LS) | ||
| Screwing | Wood screws in yellow pine* | Ø 4.1mm x 25mm | 1.700pcs |
| Wood screws in yellow pine** | Ø 8mm x 80mm | 570pcs | |
| Self-drilling screws in SPC* | Ø 3mm x 13mm t = 1.2mm | - | |
| Self-drilling screws in SPC* | Ø 4mm x 13mm t = 1.6mm | 1.200pcs | |
| Drilling | Holes in plaster board +Plywood/wooding core* | Plaster board 12.5mm + Plywood 12mm Ø 68mm × 24.5mm |
190pcs |
| Holes in plaster board +Plywood** | Plaster Board 12.5mm + Plywood 12mm Ø 125mm × 24.5mm |
45pcs | |
| Holes in SPC* | Ø 13mm t = 1.6mm | - | |
| Holes in SPC/hole saw* | Ø 21mm t = 1.6mm | 65pcs | |
| Holes in SPC/hole saw** | Ø 33mm t = 1.6mm | 65pcs | |
| Holes in yellow pine* | Ø 18mm x 120mm | 150pcs | |
| Holes in yellow pine** | Ø 30mm x 40mm | 210pcs | |
| * High mode ** Low mode | |||
Our highly efficient gear mechanism conducts the power of the motor directly without any power-loss. This enables high power Max 63Nm drilling for heaviest of applications - every job, every day.
* Percussion featured in EY7960 model only
The Tough Tool IP* concept includes features such as sensors which monitor batteries and protect against overheating and ‘over-discharge’. This technology ensures reliable, safe and powerful operation for the user.
1: Switch
Increased sealing helps protect against water and dust.
2: Electronics
The electronic circuits in control panel and battery pack are covered by a urethane layer for added dust and water protection.
3: Battery
The battery cells are designed to avoid intrusion of moisture.
*IP=INTELLIGENT POWER TOOL
English
Latviešu
Русский
